Milk cooling storage tank

Short Description:


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 1 Pieces
  • Supply Ability: 50~100 Pieces per Month
  • Product Detail

    Product Tags

    Refrigerated Mixing and Storage Tank

    We specialize in manufacturing food and medical equipment, and know you better! Widely used in food, beverage, pharmaceutical, daily chemical, petroleum and chemical industries.

    PRODUCT PARAMETERS

    Capacity(L)

    Compressor(P)

    Mixing Speed (r/min)

    Refrigerant Unit

    Refrigerant

    Size(L*W*H)(mm)

    300

    2.5

    36

    SANYO

    COPLAND

    1700x900x1550

    500

    2.5

    36

    1800x1000x1850

    1000

    3

    36

    1680x1210x1300

    2000

    5

    36

    2050x1500x1500

    3000

    6

    36

    R-404a/R-22

    2380x1700x1600

    4000

    8

    36

    2630x1800x1700

    5000

    10

    36

    2980x1900x1800

    6000

    12

    36

    3080x2100x1950

    7000

    12

    36

    3300x2100x1950

    Milk cooling storage tank 01

     PRODUCT STRUCTURE

    The refrigerated mixing and storage tank is made up tank body, agitator, refrigerating unit and control box. The tank body is made of stainless steel 304, and be minutely polished. Insulation is filled by polyurethane foam; light weight, good insulation properties.

    Milk cooling storage tank 02

    Requirements before installation

    •Must be careful when you carry it, do not tilt more than 30°to any position.
    •Check the wooden case, make sure it is not damaged.
    The refrigerating fluid has already been filled into the unit, so it is not allowed to open the valve of the compressor unit during transportation and and storage.

    Location of work house

    •The work house should be spacious and good air liquidity. There should be an one-meter passageway for operator working and maintain. When it is mechanized milking, you should consider about the connection with other equipment.
    The foundation of the tank should be 30-50 mm higher than the floor.

    Installation of the tank

    •After the tank got in position, please adjust the feet-bolts, make sure the tank tilt to the discharge hole, but not too much, just can discharge all the milk in the tank. You must make sure the six feet uniform stress, do not allow any foot be drift. You can adjust the left-right slope by Horizontal scale, make sure it is not slope to left or right.
    •Switch on the inlet of condenser.
    •The equipment switch on electric power must switch on the earth.

    Milk cooling storage tank 03

    Milk cooling storage tank_05 Milk cooling storage tank_06 Milk cooling storage tank_07 Milk cooling storage tank_08


  • Previous:
  • Next: